Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller w/ 4G SD Safety Switch Buzzer M8N GPS+PPM+I2C+shock Absorber+xt60 power module
Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller w/ 4G SD Safety Switch Buzzer M8N GPS+PPM+I2C+shock Absorber+xt60 power module
- Advanced 32 bit CortexM4 ARM high performance processor can run RTOS NuttX real time operating system;
- Integrated backup power supply and failure backup controller the main controller can be safely switched to backup control;
- Provide redundant power input and fault transfer function;
- 14* PWM/ actuator output;
- Bus interface (UART I2C SPI CAN);
- Provide automatic and manual mode;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;
Specification:
The board integrates with PX4FMU+PX4IO
Pixhawk is with new 32 bit chip and sensor technology
Processor:
32 bit 2M flash memory STM32F427 Cortex M4 with hardware floating point processing unit
Main frequency: 256K 168MHZ RAM
32 bit STM32F103 backup co processor
Sensor:
L3GD20 3 axis digital 16 bit gyroscope
LSM303D 3 axis 14 bit accelerometer /magnetometer
MPU6000 6 axis accelerometer / magnetometer
MS5611 high precision barometer
Interface:
5* UART 1*compatible high voltage 2*hardware flow control
2*CAN
Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
Futaba SBUS compatible input and output
PPM signal input
RSSI (PWM or voltage) input
I2C
SPI
3.3 and 6.6VADC input
External USB MICRO interface
Package A included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x Shock absorber
1x M8N gps module with shell
1x GPS stand
1x xt60 power module
Package B included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x PPM encoder
1x I2C splitter expand module
1x Shock absorber
1x M8N gps module with shell
1x GPS stand
1x xt60 power module
Package C included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x Shock absorber
1x M8N gps module with shell
1x GPS stand
1x T plug power module
Package D included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x PPM encoder
1x I2C splitter expand module
1x Shock absorber
1x M8N gps module with shell
1x GPS stand
1x T plug power module
(4.86)
(4.55)
(3.75)